Fact 5: If you are not very careful you will buy magnets that are made from
If you scan the first page of any of the major search engines Google, Yahoo, MSN
etc you will see the same companies spanning these search engine pages.
If you haven’t already visited all the sites on the first page I’m sure you will
within the next few days. It’s obvious that you will be searching around for the
best possible quality magnets.
When you do search these top ranking sites you will no doubt see straight away
that a few of them (I won’t name them as it will be clear who they are when you
visit them) are having a permanent ‘war’ over whose magnets are made from the
best quality materials.
As a person looking for information on magnetic therapy the ‘my magnets are
better than yours’ mentality of these sites does not inspire confidence or
provide you with a clear cut answer to your question of which material is best
for therapeutic purposes?
Here is a very quick low down on the 3 types of
materials used in therapeutic magnets. And
which one does the ‘job’ the best
1. Hard ferrite (ceramic) magnets were developed in the 1960's as a low cost
alternative to metallic magnets. They are made from strontium carbonate and iron
oxide both of which are readily available and low in cost. Even though they
exhibit low magnetic fields (compared with other permanent magnet materials),
ferrite magnets are widely used for industrial and domestic purposes. Ferrite
magnets have good resistance to demagnetization, excellent corrosion resistance
and the biggest advantage of such economic cost.
The main drawback of using ferrite magnets for therapeutic purposes is the fact
that they are very heavy and bulky. A 3,000 gauss ferrite magnet is very large
and would be over 4 cm in diameter which is an unrealistic size for healing
Most ferrite magnets used in magnetic therapy are low gauss normally around 800
gauss and around 1.8cm in diameter. They are too large to be used in jewellery
2. Samarium cobalt is a type of rare earth magnet materials that are highly
resistant to oxidation, have a higher magnetic strength and temperature
resistance than Alnico or Ceramic materials. Samarium cobalt magnets are brittle
and prone to chipping and cracking and may fracture when exposed to thermal
shock. Samarium cobalt’s’ downfall is its cost and its brittleness; it is very
prone to chipping and must not be used as a structural component. Samarium
Cobalt also requires extremely high fields to magnetise it, which can influence
size and shape of component.
Samarium cobalt magnets are much stronger than ferrite magnets and therefore a
much smaller magnet can be significantly stronger than a ferrite. However they
do not compare to the strength of neodymium (neo) magnets and are much larger
than standard neo sizes when comparing strength.
3. Neodymium magnets are also a member of the Rare Earth magnet family and are
the most powerful permanent magnets in the world. They are also referred to as
neo magnets. They are a relatively new invention, first manufactured in 1984 and
have only recently become affordable for everyday use.
Neodymium rare Earth magnets have a high resistance to demagnetization, unlike
most other types of magnets. They will not lose their magnetization around other
magnets or if dropped.
If you've never handled neodymium magnets before, you will be amazed at their
strength. Neodymium magnets are over 10 x stronger than the strongest ferrite
magnets and 4 x stronger than samarium cobalt.
Neo magnets have similar properties as the Samarium Cobalt except that it is
more easily oxidized and generally doesn't have the same temperature resistance.
Neo magnets also have the highest energy products approaching 50MGOe. These
materials are costly and are generally used in very selective applications due
to the cost.
The most convenient method of comparing the magnetic performance of different
types and grades of permanent magnet is to consider their maximum energy product
(BHmax). This is the point where the magnet will provide most energy for the
|Samarium Cobalt (2:17)
||100 mT (1000 Gauss)
|Samarium Cobalt (2:17)
||350 mT (3500 Gauss)
||450 mT (4500 Gauss)
The above table shows typical pole face flux densities for the 3 grades when
working at approximately their BHmax points.
What all this mean is, If you have 3 magnets, a ferrite, a samarium cobalt and
a neo, which are all 4mm in diameter they would all be different strengths.
The neo magnet would be a maximum of 3,000 gauss, the samarium cobalt a max of
2,000 gauss and the ferrite would be less than 5,000 gauss.
So it is not hard to see why the magnet of choice in magnetic therapy has to be
neodymium. It is the lightest weight has the highest strength, power and
performance and is smaller than all of the other magnetic materials. If you have
a choice of magnets always pick neodymium to achieve the best results.
next: What other ailments can a magnetic bracelet treat >>
privacy | security |
New to Magnetic Therapy?
Claim your FREE information pack
Like This Site
Tell a Friend About it